Geocel

THE WORKS PRO Sealant & Adhesive

Sealant
Adhesive
MS Polymer

Geocel THE WORKS PRO is a high performance sealant and adhesive, which can be used internally or externally on almost any surface and in wet or dry conditions. Using THE WORKS PRO, there is no shrinking, no staining, no solvents and no need for additional fixings for most applications.

Product info

Benefits

  • Use on wet or dry surfaces
  • Cures underwater
  • Bonds and seals virtually any material
  • Paintable
  • Resists mould growth
  • Excellent service temperature range
  • Excellent resistance to UV

Substrate Type

  • Wood
  • Metal
  • Glass
  • Stone
  • Plastic
  • Masonry
  • Polystyrene
  • Concrete
  • Brick
  • Tile
  • Plaster
  • Wet surfaces

Colours

Grey

Brown

Black

Beige

Clear

Oak

White

Introducing THE WORKS PRO

Technical Information

Where to use Interior/Exterior
Paintable Yes
Skin Overtime 15 min
Time to cure 24 hours
Time to cure disclaimer 3mm per 24 hours
Container Type Cartridge
Shelf life 1 year
Sizes 290 ml
Application method Sealant Gun and Cartridge

Application

Surface Preparation

Ensure substrates, gaps and cracks are clean and free from dust, dirt and grease.

Application Instructions

Remove nozzle and cut off the tip of the cartridge. Replace the nozzle and cut the tip to the required width at a 45 degree angle. To secure: Apply Geocel The Works Pro in dots or beads. Once applied, surfaces should be firmly pressed together. To seal: Apply a continuous bead of Geocel The Works Pro ensuring it makes full contact with the sides and back of the joint. Tool within 5 minutes for a professional finish.

Clean up

Uncured sealant can be removed with THE WORKS Spray Multi Use Cleaner or a suitable solvent.

Quantity Estimator

Enter joint dimensions below to estimate number of cartridges required

Calculate

You will require x cartridge



Welcome to Geocel

For over 30 years, we’ve been trusted by the trades to deliver the best quality sealant and adhesive solutions.